 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat wiring.
I am attempting to change my current thermostat (White-Rodgers) with a Hunter thermostat (44155C) and need assistance with the wiring. The White-Rodgers wiring is labeled R-red, G-green, Y-yellow, W2-white, X1-brown, and B-blue. I would like to know how to connect these according to the Hunter color scheme which is labeled G, RC, RH (these two together comprise the "jumper" connection), Y/O, W/B, Y1. Any help with this will be greatly appreciated.
|
||||
Check out some similar questions!
Wiring a thermostat
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...
I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
