 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a Day and Night gas furnace
I have a Day and Night plus 80 gas furnace I did a self test and cleaned the filters
Problem is after about two days it does the following when I set Temp at 80 1 it starts up like it should to the igniter shows a glow like it will ignite the gas 3 the igniter fades out 4 igniter come back on 5 goes back out and then furnace shuts off without even igniting the gas Any help would help I am no expert and would not want to call in a service person if I can do it myself |
||||
Check out some similar questions!
I have a Day n Night gas furnace. The blower seems to be working as expected but the gas does not light up. I cleaned the filter which was extremely dirty. Any thoughts? Thanks.
Day & Night (Carrier) Natural Gas Furnace Model 394JAZ036065AAFA with intermittent pilot (3-wire model 740A). Problem 1: Sometimes it works fine, but more often than not the pilot will not light unless I blow on it with a blow dryer while the electrode/ignitor is sparking. After just a couple of...
Hi, My 20 year old day and night model 394jaz036065 lights the pilot and after awhile fires the burners then shuts down. Now it just lights the pilot and then shuts the pilot down after a while 2+ minutes. Is the flame sensor mounted to the ignition/pilot assembly? I am trying to confirm that-...
Hi- I have a furnace that I need a common wire to hook up A new thermostat that req's a common wire- The Company that originally made the furnace, BDP - merged w/ Carrier I think- I have a Red and Blue coming out of the top of the transformer And black & white @ the bottom - 115v looks...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
