Ask Experts Questions for FREE Help !
Ask
    kirkreid's Avatar
    kirkreid Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Mar 21, 2012, 06:20 PM
    Harden TA10-H handle
    I really would like to get a original handle that came with the shower, they sold me this after market handle that doesn't even have the bell
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Mar 21, 2012, 09:23 PM
    Harden ? Ufffff... That's a bad word in plumber's vocabulary. It is "our" local manufacturer of decorative plumbing fixtures that look good but just would not function properly. Parts are hard to get and very (very) expensive. In 2001, Harden was purchased by Fisher manufacturing - and if I am not mistaken, Fisher let it go under. Today, you can get some parts, like stems, from Chicago Faucets (Harden Faucet Parts ), but overall, I suggest you replace the entire faucet - that's the best advice I can give you. Good luck. Milo
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Mar 22, 2012, 04:47 PM
    Hi guys..

    In my area, Harden was handled by SYMMONS INDUSTRIES. Although I think they have discontinued manufacturing parts for Harden's valves, I know they have repair parts available online.

    Contact symmons industries @

    Symmons Industries, Inc. - Bathroom and Kitchen Faucets, Shower Valves and Accessories

    You can also check out this site:

    Symmons/Harden TA-10H Spindle - Locke Plumbing

    These guys have the Symmons/Harden TA-10H Spindle in stock... may have your handle, too!

    Back to you...

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harden industries los angeles? [ 4 Answers ]

I have Harden Industries shower fixtures. Harden Ind. Went out of business a few years ago. I have a problem with the Harden hand shower head and the hose which attaches to it. The original hose was destroyed during re-plating. The hose has an adapter which attaches to the wall unit. I can 't...

I have the Harden TA10-H [ 1 Answers ]

I don't know how to get the stem off, after taking the handle off and the plate off, there is another piece that has a little screw to right,does that somehow com off and if yes how ?

Concrete won't harden properly [ 1 Answers ]

I hired someone to place the concrete for my new front porch. The mix seemed too wet when they were pumping it in to the forms, and now it won't harden completely, even after two weeks. They didn't do slump tests. I want to have it removed and replaced, as I am unwilling to continue building on top...

Harden plumbing parts [ 0 Answers ]

Need rerplacement receptical for harden stem. # on receptical is 92HBR. Where can I buy/order one?

Harden plumbing parts [ 1 Answers ]

Need replacement receptacle for harden hot water stem. # on receptacle is 93HBR. Can you find it?

View more questions Search