Ask Experts Questions for FREE Help !
Ask
    wngnit1's Avatar
    wngnit1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 19, 2012, 12:41 PM
    Roof air/furnace model 585HJ024040
    I replaced the thermostat, but still not working. Blower works but no heat. How do I check the ignition control unit which I think cost around $500, Yikes !
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Mar 19, 2012, 06:34 PM
    This is a situation where I believe it would save you money to get a professional opinion before you sink more unnecessary bucks into it buying parts that are not bad
    jdublon's Avatar
    jdublon Posts: 10, Reputation: 1
    New Member
    		  
    #3

    Mar 22, 2012, 05:14 PM
    Usually you can power the igniter if the top surface igniter if you have one that spark you can take ohmmeter and check the transformer for connectivity
    john
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Have a goodman furnace/air conditioner split unit model 436-30 [ 1 Answers ]

The other day it started smelling hot inside the air handler cabinet. Upon examination I found what appeared to be one of the black power wires lying on cabinet floor with insulation melting and fan motor had stopped. I called a tech who plugged wire back in to terminal on top of one of the...

GE forced air furnace, model bld055e936b1, no heat [ 1 Answers ]

I have a GE forced air furnace, model bld055e936b1, pilot light is on, blower motor functional. I think it may be the fuse, but don't know it's location or how to remove it. Anyone have schematics on this unit or any ideas? Thanks Frank

My Coleman Evcon Electric furnace blows cool air. Model#EB15A [ 0 Answers ]

Nordyne air conditioner furnace model #e2eb-012hb [ 0 Answers ]

I'm trying to rewirer my nordyne airconditioner furnace it's the one inside the house under the coil trying to find where the wires to the sequencer connect for model#e2eb-012hb need complete wiring diagram.

No heat from a Coleman Direct vent forced air furnace Model #7680a [ 2 Answers ]

I am having promblems with getting the heat from an older Coleman Direct vent forced air furnace Model #7680a that's installed in a mobile home. The thermostat was replaced The fan comes on. The pilot feed that goes into the side but isn't attached. Do u have any specs on this model?

View more questions Search