Ask Experts Questions for FREE Help !
Ask
    calvinwg's Avatar
    calvinwg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2012, 07:47 PM
    Beach furnace troubleshooting?
    Have beach furance in moblie home tries to start won't start takes 3 or 4 times then works and works fine for few days and so time if turn theromaste up it works
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 15, 2012, 03:20 PM
    The flame sensor rod is dirty. Clean it off with fine sandpaper. It's a thin metal rod with ceramic insulator near flame.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beach furnace [ 1 Answers ]

Have had repair guy here 3 times, has got furnace running every time but, quits in few days ? Can use reset 1or 2 times will start , then quits altogether, furnace guy replaced,oil filter,nozzel,checked electrical parts with tester alls good,furnace runs great when it runs? Repair man says maybe...

Csa certification Beach oil fired warm air furnace [ 1 Answers ]

I am attempting to provide a customer with a TSSA inspection (Ontario) for their Beach oil fired furnace, this is a standard "trailer" furnace, compact in size intended to be installed in an alcove or closet. There is little or no info posted on the unit, whether removed or painted over, it has a...

Sensor for Beach furnace [ 3 Answers ]

I have a Beach furnace 1973 and the seņor is not working, please can someone let me know where I could buy a sensor from? I had an electrican that tried to help me but was unable to get one for the beach furnace.Thank you

Beach furnace conversion to mac limit switch [ 10 Answers ]

We have a Beach furnace which is very old (installed in 1973). The limit switch connected to the temperature on the Beach needed replacing and we were told that a switch for a Mac/MGH furnace would work. The problem that we encountered is that there are more wires coming into the Mac limit swith...

Looking for wiring diagram for a Beach furnace [ 1 Answers ]

I'm looking for a schematic or wiring diagram for a aprox: 1972 Beach furnace model # M72-0.

View more questions Search