 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ip3000 - cleaning out waste ink
My Canon IP3000 printer developed problems printing. I purchased a new print head from Canon and installed it. I am still getting weak and incomplete patterns on the black ink. I think it may have something to do with a waste ink problem.
It will not complete a print head alignment, (because of not printing black), and printing documents is very incomplete in black. I have also replaced the black cartridge 3 times to eliminate the possibliilty of a faulty cartridge. Help anyone? |
||||
|
||||
|
You have no problem with the waste ink, your black nozzles are clogged. You have to clean them. The best way is with speciall nozzle cleaning solution, but if you cannot find any, try with hot water (a lot of hot water, but not too hot). Run 2-3 times cleaning cycle, and print a pattern each time. Leave the cartridge to rest for the night, and the next day print again the pattern. I think it should be better :)
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have new new modular cape that had the first floor plumbing complete, and the second floor stubbed, and want to know the right way to connect the second floor waste drain which was installed in the house, to the main waste drain. The main waste drain comes up verically from the basement floor...
When I start up the machine I am notified that the shortcut is missing. HELP!!
Do generic ink cartridges harm a printer --Lexmark-- and if so how? I had used them successfully in the past, but this time one of them doesn't work. The black doesn't print. Have I damaged the printer? Is there anything I can do?
I have a Canon BJC-2100 printer, and until recently it worked great. My problem is every time I print something the ink smears in a line on the paper. I tried cleaning it, and putting in a new ink cartridge, yet it is still doing it. HELP!
View more questions Search
|
