Ask Experts Questions for FREE Help !
Ask
    slayslay's Avatar
    slayslay Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2012, 02:26 PM
    Burner not igniting on ruud furnace
    Replaced control board, ignition control, and thermostat on ruud furnace, still not getting 24 volts at gas valve.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Mar 11, 2012, 03:18 PM
    More info please. Is the igniter sparking or glowing? Have you checked pressure swithces?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ruud furnace burners not igniting [ 1 Answers ]

I replaced the control board and the ignition control module on my Ruud furnace. I have 24 volts at the ignition control and only 8 volts at the gas valve. If a supply 24 volts via a jumper wire to the gas valve the valve opens and the burners ignite.Is it possible that I got a bad control board...

Burner not igniting, w/r ignition control [ 5 Answers ]

Burners not igniting, nitride ignitor is red and gas is flowing, added new ign. Cntl. And now the ignitor stops glowing when gas vlv. Is powered up??

1992 ruud model 90, burner assembly? Screen is burnt out. [ 12 Answers ]

Are there any burner upgrades for this furnace? Ruud mod 90 ser#bu5707 m46921326. The screen is burnt off it and the tech says the part has been discontinued. Thanks for any help. Lou

Burner are not igniting [ 2 Answers ]

Turn system on, glow stick glows, pilot light lights, but burners not lighting. Help

Furnace blower going but burner not igniting [ 1 Answers ]

My furnace was going on and off very frequently for the past two days. Now the blower is going but the burner is not going on. Any ideas?

View more questions Search