Ask Experts Questions for FREE Help !
Ask
    beccamb's Avatar
    beccamb Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2012, 06:38 AM
    Sink sprayer issue
    Hi,
    I just replaced my kitchen sink faucet and it all works fine, except the sprayer can't be tightened enough - the base wiggles all around and you can lift it up - there is a huge gap. I assembled it before installing it in the sink to make sure there was only one way it would go together. There were no written directions, just an assembly drawing. I followed the directions step by step and there are no extra parts left over - but the sprayer assembly just won't tighten up enough. Any suggestions?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Mar 11, 2012, 07:22 AM
    And you have all the parts?(see image).
    Could the handle mount be cross threaded? Let me know, Tom
    Attached Images
     
    beccamb's Avatar
    beccamb Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 11, 2012, 08:28 AM
    My husband helpfully showed me that I had put the plastic washer assembly on backwards, so I was able to fix it. Thanks!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Mar 11, 2012, 10:15 AM
    Thanks for the update. If we can ever be of assistance in the future we're as close as a click. Cheers. TOM
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sink Sprayer [ 1 Answers ]

I was wondering if someone could come to our house and fix our kitchen sprayer. It is going to be a christmas present for my mom.

Kitchen sprayer issue [ 1 Answers ]

Hi, Recently my sprayer on the kitchen faucet has not been working properly. When I engage the sprayer, it sakes several tries, or 5-6 seconds until it starts spraying. Once it starts, it works perfectly and goes on and off as it should. If it sits for a period, then it repeats the same...

New sink sprayer will not thread onto sink fitting [ 9 Answers ]

I want to install a new sink sprayer onto a faucet where the old one was removed and capped off. The new sprayercompression fitting seems to be too big. Is there an adapter? I have never seen anything like this before. It also seems like the faucet stem is not only smaller but too short to get...

Sink sprayer [ 3 Answers ]

My sink sprayer doesn't work. Is there some way to fix it without buying a new faucet and sprayer?:

Kitchen sink sprayer leaking from under sink [ 1 Answers ]

My kitchen sink sprayer is leaking from underneath my sink. We just replaced the spray head part. Could it be the hose or what else could it be? Thank you!

View more questions Search