Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker
[ 10 Answers ]
:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...
How to wire a circiut board to A/C heat pump
[ 1 Answers ]
I just changed out my circuit board, A/C heat pump and the wires got crossed up in doing so. Please help me get the right wires in the right place again. The connections are R C Y O W2 W/E G
MAF sensor wire circiut
[ 1 Answers ]
I found out today that my 1998 nissan altima MAF sensor wire Has some damage and sometimes circuit flow cut off in middle of driving So that I am getting engine off . Please give me your wonderful advice how to manage such case. Thank you
14 gauge wire on 20 amp circiut
[ 1 Answers ]
Can I use 15 amp outlet on 14 gauge wire that goes into a split box that has 12 gauge wire that goes back to the fuse panel and has a 20 amp circiut
Electric circiut for lighting
[ 1 Answers ]
Hello sir I`m doing a project on energy conservation in lighting. Sir I`m planning to prepare a model for this. I need the circuit for the same. Circiut should be to automatically sense a person entering the room and switch on the lights and fans in the room. Similarly as he moves out. Power... View more questions Search
|