Ask Experts Questions for FREE Help !
Ask
    Achikeonwuazo's Avatar
    Achikeonwuazo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2012, 01:10 PM
    Three Phase Load Distribution
    How do I redistribute load on a 3 phase power generator to balance the current demand on each of the phases
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 10, 2012, 06:08 AM
    Measure the amps per phase and each connected circuit, move the loads with higher amp load to other phases until the load is balanced.
    sinnadurai's Avatar
    sinnadurai Posts: 127, Reputation: 2
    Junior Member
    		  
    #3

    Mar 11, 2012, 02:45 AM
    Change phase for singlephase loads till it is balanced
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Powering single phase load with 3 phase generation [ 4 Answers ]

How to select a 3 phase generator for 75kva of single phase load calculated

May distribution of Main MCB 3 phase is distributed for 1 phase MCB [ 1 Answers ]

Dear Help Desk, May the distribution of Main MCB 3 phase is distributed for 1 phase MCB

Load calculations for three phase [ 0 Answers ]

Hi There -Three phase 240VAC power supply -Full load current is 240amp. 80amp/phase.. Is there any formula to balance the load current on each phase. Please advise. Thanks.

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping

View more questions Search