 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Miller model msba 066 furnace controller?
My Miller Model MSBA 066 furnace clicks when it calls for heat; sometimes through a complete cycle other times just for a second or two then works fine. If I hit the controller lightly it fires right up. Any thoughts?
|
||||
Check out some similar questions!
I have a Miller Furnace in mobile home. HAve had repairman twice and still not resolved. Problem: Sometimes the furnace doesn't "come on" when the thermostat gets to the point where it requires heat. If you touch the thermostat it just clicks - however if you open the furnace door & push button...
When you hit the reset button the furness lights and run until room temp is met then when room temp drops it will not relight with out hitting reset again?
Looking for a manual
The original nozzle reads: .60 (gal/min) and 80 B (degrees). Can I use a .65 and 80ES nozzle on my kerosene fueld Miller Mobile Home Furnace?
I have a miller furnace. It runs on LP gas. It comes on the ignitor comes on the burners see to light but the blower won't come on. Is this the mother board? I have replaced this in the past. The ignitor was burned out and I replaced it. I still can't get the blower to come on.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
