Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kitchen Drain Leaks
[ 1 Answers ]
My double sink backed up and I had to remove the pipes under the sink to clear the clog. I put every thing back together but both traps are leaking. I replaced the poly gaskets and lock nuts but still they leak. Any ideas of what I'm doing wrong? Do I need to use any sealant or putty? The kid...
Height of drain pipe for washer
[ 2 Answers ]
Sorry, but I think this may be a totally rookie question. Instead of having our washing machine discharge into a sanitary tub I added a T to the drain and made a dedicated drain for the washer. The height of the pipe was only about half of the height of the washer itself. Now, when the washer tries...
Drain stubout too short
[ 1 Answers ]
Hello, I ran into a problematic situation at my friend's house. I need to install sort of a kitchen sink (I use the term "sort of" since technically, it's a kitchen sink; but it's actually not being installed in a kitchen and will most often not be used for standard kitchen procedures) using the...
Method for raising drain height in slab?
[ 5 Answers ]
I am installing a subfloor in what used to be the garage, over a concrete slab... There is an existing toilet that I removed temporarily, however the flange for the toilet is on the slab, approximately 2.5" too low for the new floor. I pulled the flange off, and in the process realized that...
Kitchen drain
[ 1 Answers ]
I've developed a leak in the kitchen drain. Naturally, it's behind sheetrock and insulation so I had to remove that. I've been told that the problem may have been caused by the use of black ABS pipe instead of PVC. Since this drain serves my dishwasher as well as the sink, it must handle water that... View more questions Search
|