 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a 3 zone Lennox boiler system. One zone not working. I get hot water to two of the zones both supply and return. Non-working zone has hot water to the supply cold on the return. I first thought the circulator was out but it has current from the Aquastat, plus the other two zones have hot on...
I got pulled over in Quebec 2 times this summer, the police tell me my licence is no good and gave me a fine, seized my truck. After the first time I checked and Ontario said they were good so I thought Quebec must have made a mistake and drove there again to find the police behind me ,telling me...
I have had two heat/air conditioning guys out to check my unit and they both said that my zone damper needs to be replaced. Apparently I have two for dual control. I have one with a part # that reads 645 24V 60HZ 6W 60 RPH 37944L-6 9218 The name synchron is on the part. It would be great if...
I have a gas fired boiler that uses seven Honeywell Synchron valves for zoned heating. All the valves are model V8043E1012. One of the valves seems to be stuck in the on position regardless of the thermostat setting. Also, I noticed the slide switch (auto or manual) on the valve in question has...
Where to find the model number on my Honeywell Synchron zone valve. I think the Powerhead and/or motor has gone bad. I had no heat in my master BR this morning and after verifying the Thermastat was kicking in I went down and tried to check the valves. This is just 1 zone out of 5 (3 other...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
