Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Zoned heating not working properly
[ 0 Answers ]
Have a Lennox G40UHX, Honeywell HZ311 Zone Panel, T-stat Focus Pro6000 (TH6110D1005) and Pro5000 (TH5110D1006). Heater does not come on but fan works on t-stat 6000 (downstairs). Heater comes on with t-stat 5000 (upstairs). All is new, Jan 10, and 6000 heat worked about 2 months ago. Purged zone...
Zoned heating not working
[ 1 Answers ]
I have 5 heating zones in my home One of the zones are not functioning The boiler seems fine the other zones have heat and the thermostat seem fine from what I can tell... Anyone have any suggestions
Single to dual zoned thermostat conversion
[ 1 Answers ]
Hi, I am going to move into a 2 story home which has a single temperature controlled thermostat. I want to make it a dual Zoned one by adding one on the second floor in addition to the one downstairs. How much would it approximately cost to do this and how tough is this job? Thanks, SB
Slushing noise in two zoned heating system
[ 1 Answers ]
I have two zoned hot water baseboard heating. There is air in one of the zones (slushing noise). The zone lever is set on closed. I tried reversing one of the lever close valves, which put it in an open position. Then I drained using the blue drain valve. When all done, I turned the lever gate...
Zoned heating system problems
[ 4 Answers ]
I need help with information about my current heating system, I will try to be as brief as possible. We built a 5200 sq ft duplex home (2600 each side), with 4 levels. The heating contractor told us he could put in 4 zones, one for each floor. We moved in late fall of 2006 and discovered the... View more questions Search
|