Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Have a limit switch problem on my heater, do not know where to look for this switch
[ 1 Answers ]
Have a limit switch problem do not know where to look for this switch
My trane heater is reporting an 'open temp limit switch error'
[ 0 Answers ]
According to manuel the red LED flashes 4 times indicating an opne temp limit switch error. Trying to figure out any way to confirm switch is bad or just needs reset
Rheem XE 80 "high temp limit switch" fault
[ 1 Answers ]
On my Rheem XE 80 downdraft gas furnace, I'm getting intermittent heat. Getting error code of 4 blinks on the single red LED, which means "high temp limit open". The purge fan has been cleaned (it was very dirty) and the vacuum line to the vacuum switch is not plugged. Vacuum switch itselfs...
High temp limit
[ 1 Answers ]
Working on an older bryant furnace was off on ahigh temp limit shouldn't blower still come on to help close limit
Goodman limit switch/pressure switch?
[ 2 Answers ]
Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the... View more questions Search
|