Ask Experts Questions for FREE Help !
Ask
    smoochhvac's Avatar
    smoochhvac Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2012, 08:02 PM
    Blower on Climtrol 174-065
    Blower will not run when T-stat is in the auto mode but runs fine in the on mode.

Check out some similar questions!

Intertherm mgh-065-abwn-06 pilot fares up when turned on? [ 0 Answers ]

Intertherm MODEL # mgh-065-abwn-06 THE pilot fares up when turned on FROM THE LITE MODE

I have a trane eletric ignition heater and blower furnace is heating up but no blower [ 1 Answers ]

My thermostat is a white /rodgers module this clicks to start but no air blowing from the furnace in the attic which is a trane model and the same with cold air the thermostat clicks the ducane model outside whirs but no cols air.

45692-001 blower control board will not turn blower on in either heat or cooling mode [ 2 Answers ]

Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...

Where is the reset button on a nordyne mgha 065 gas furnace? [ 1 Answers ]

Blower only works when thermastat is on 'on' not auto . It's driving me crazy. Can't find wher reset button is. Please help me. I'm cold.

Test voltage of white rodgers flame sensor & 50e47-174 modual [ 2 Answers ]

I have modual shut down of a w-r 50e47-174 modual I cleaned the flame sensor & it works about 2 days to a week before failing. After turning the power off & back on the unit works fine for a short time. How do you test the flame sensor & what volt output Thanks Theo

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.