 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pilot won't stay lit... GE Eneryguide/Smartwater
HELP NEEDED! My water heater is on the fritz... It's still sparking when I try to relight it. I can get it lit once every 2,000 clicks, but it goes out when I turn up the temperature and release the pilot knob and turn it to on... Any suggestions folks?
|
||||
Check out some similar questions!
I have replace the thermocouple- (copper line from the gas valve to the pilot ) still the flame won't stay lit. What nexts?
I have two empire wall heaters.One works fine the other the pilot won't stay lit.I have switched the thermopile or flame reader on them to see if that's the problem and its still the same the one that worked still works with the thermopile from the other and the one that didn't work still doesn't...
My pilot will not stay lit when the heater comes on.
My mother has an old floor heater that is about 45 to 50 years old and needs a key to turn the heat up and down, also to turn on the gas for the pilot light or off in the summer. When I try to light the pilot it will flicker but not stay lit. I have tried to clean the pilot tube with no such luck....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
