Ask Experts Questions for FREE Help !
Ask
    lmjohanson's Avatar
    lmjohanson Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 7, 2012, 05:03 PM
    Splicing a 3 wire 220 to a 4 wire 220
    We just got a small point-of-use hot water heater for under our kitchen sink. We have a 4-wire 220 line available that we used to have an electric range hooked up to but recently changed to a gas range, so it's not being used at all. The hot water heater has a 3 wire cord on it and we need to splice at a junction box. Do we hook up red to red, black to black, ground to ground and cap the neutral? Also, is 40 amps enough or maybe does it need 60? It is a small heater.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Feb 8, 2012, 05:46 AM
    Befoe we can tell you how to connect the heater, we need to know the specifications of the heater, input voltage, wattage etc.

    Make and model number?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

Splicing 220 Wire [ 2 Answers ]

I have a 220VAC window air conditioning unit and I would like to shorten the cord considerably. Is it safe to use a butt splice on 220VAC? I think the cord is 12 gauge.

Splicing 220 volt 6 ga. Wire [ 1 Answers ]

:confused: In regards to question asked by 1936 roadster on oct.7 2007 @ 11:34pm. I have a 220 volt 50 amp. 6 ga. 4 conductor electric wire that is about 6 feet to short to reach new location. Does the nec permit in line splices? Do they have to be staggered? Do they have to be enclosed. This line...

Hard wire 3 wire to 4 wire 220 service [ 1 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

Hard wire 3 wire to 4 wire 220 service [ 2 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?


View more questions Search