Ask Experts Questions for FREE Help !
Ask
    dimej's Avatar
    dimej Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2012, 09:17 PM
    Cooper Decorator Switch flashes?
    I have installed a Decorator Switch by Cooper Wiring Devices. The light on the switch flashes, any idea why?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Feb 7, 2012, 07:38 AM
    Either you have a defective switch or you did not connect the switch properly.

    Can you tell us what connections were made when you installed the switch.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    Feb 7, 2012, 10:28 AM
    The pilot light is many wall switches will only work properly when controlling certain loads, such as an incandescent lamp, but not with a compact fluorescent lamp.

    What is switch controlling?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Evcon Furnace 3 Flashes Combustion Air Switch Failed to Close. How Do I Repair It? [ 2 Answers ]

Evcon Central Furnace fault light flashes 3 times, combustion air switch failed to close, how do I make repairs?

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t [ 2 Answers ]

Code flahes 3 short flashes by 1 long flash

I have a heil furnace mod ntp6/tne it flashes a code 4 [limit switch] [ 0 Answers ]

Bouth the blower and combustion fan run cuntinusly I bypased the thermal limit switch and bouth the lim. Switches on blower and no change am I missing something or is it a cercut bord issue

Regular ceiling light flashes when switch is off [ 1 Answers ]

When ceiling light in the bathroom is off, the light blinksdo I have to worry and how can I fix?

Cooper Motion Switch and High Heat [ 1 Answers ]

I just got the cooper motion sensing switch for my kitchen and after about an hour of use I noticed that the face plate was a bit warm. I took off the decorative face plate and felt the metal flanges that the screws go into and it was almost too hot to touch! Can this be normal? Is there a fire...

View more questions Search