Ask Experts Questions for FREE Help !
Ask
    trainfever's Avatar
    trainfever Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 4, 2012, 11:39 AM
    Heater starts then stops?
    I replaced the flame sensor in my arcoaire furnace but the burners still will not stay lit.

Check out some similar questions!

Heater burner not starting up - flame starts and stops [ 6 Answers ]

I have a Trane XL 80 two stage furnace which has been acting strangely the last couple of weeks. When the heater is started, the igniter comes on and the when the gas starts to flow the burner starts on. However within a couple of seconds the burner turns off. The burner restarts after a minute or...

Gas furnace -thermo clicks a buzzing starts.Gas flame starts for 10 secs & stops [ 0 Answers ]

I have an old Sears Power Miser Natural gas furnace. It doesn't always come on, but when it does the thermostat clicks and a buzzing starts. You can hear the gas flame start and then 10 seconds later it shuts off. If I turn the fan on manually (before the 10 seconds is up) the flame remains burning...

Goodman furnace problems when running the ac it starts stops starts stops [ 1 Answers ]

I have a goodman furnace 98% efficient it works fine on heat but when I run the ac unit it will run fine for an hour or three but then it will start stoping and starting the blower motor I have changed the transformer the blower motor the door switch anyone have any idea why it does this any help...

AC starts a cycle stops and loud noise starts from inside Air Handler. [ 1 Answers ]

The central a/c unit worked fine all day and in the evening started a new cycle stopped after about 30 seconds and started making a loud noise inside the air handler for around 90 seconds and tried to start a new cycle without success. I turned the unit off overnight and back on the following...

Heil Gas Updaft Heater Starts & Stops [ 5 Answers ]

I have a 20year old Heil gas updraft with electric start and it has stopped starting. I checked out all electrical connections and the pressure switch and all wiring seems to be OK. I cleaned the contacts anyway and checked all wires connected by wire nuts. I also had a heater man come out and...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.