Ask Experts Questions for FREE Help !
Ask
    needtv's Avatar
    needtv Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2012, 02:06 PM
    MY PT-52LCx16 won't turn on
    ?MY PT-52LCx16 won't turn on
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #2

    Feb 4, 2012, 03:50 PM
    Do you get any lights on the set at all? Any indication of power? If you get lights, what color are they and do they blink? If they blink, how many times do they blink, or is there any kind of pattern to their blinking?

    When was the last time you replaced the lamp on the TV? Have you had any other service done to the TV? Have you tried unplugging the TV for a while then plugging it back in?
    needtv's Avatar
    needtv Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 4, 2012, 03:54 PM
    No lights of any kind, was replacing lamp and now TV won't turn on. No other service done. Yes and unplug and replug into different outlets. Still nothing.
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #4

    Feb 4, 2012, 04:09 PM
    After replacing the lamp, did you make sure to secure the lamp door on correctly? If so, check to make sure you didn't damage the killswitch or the part of the door that presses the killswitch.

    Was it working fine before replacing the lamp? If so, why did you replace the lamp? If it wasn't working fine before, what was wrong?
    needtv's Avatar
    needtv Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Feb 4, 2012, 04:16 PM
    There was no picture, but still have the green power light. Turn off the TV with the remote and looked at the lamp and saw that it was black on the end, so order a new lamp.
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #6

    Feb 4, 2012, 04:59 PM
    Okay. What did you find upon inspection of the lamp door?
    needtv's Avatar
    needtv Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Feb 4, 2012, 08:04 PM
    Open and close just fine, did not notice anything. What should I be looking for?
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #8

    Feb 4, 2012, 09:23 PM
    There's usually a switch somewhere just inside the door panel.

    This is the only thing I can think of that would be affected if all you did was change the lamp. If you took the back off completely, then it could be anything.

    Without taking a look at the TV it's difficult for me to say for certain what's going on though.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

When you turn themostate up to call for heat what's the first thing to turn on [ 0 Answers ]

My Lawn Mower Cab Cadet wheel will not turn to the left but will turn to the right [ 0 Answers ]

When I was Mowing my yard yesterday the wheel was kind of hard. After mowing for over 30 min. I was trying to turn around a tree to the left and I heard a click. After that I can turn the wheel to the left, but the mower will not. Please Help, Martha

I have a Whirlpool Electric Dryer that doesn't turn on. Bypassed the thermal fuse still doesn't turn on. [ 0 Answers ]

Just a quick question.

My 2002 Avalon key turn enough to unlock the steering, but cannot turn the car on [ 1 Answers ]

My 2002 Avalon key turn enough to unlock the steering wheel but cannot turn the car on. I tried everything that I read on this forum, but it did not work. So my conclusion is my cylinder is bad. How do you change the lock cylinder with the key just turn enough to unlock the steering wheel, if you...

View more questions Search