 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor breeze fans with remote without pull chain
I have 2 harbor breeze fans both fans have the same problem. The low, medium, and high speeds work on both remotes but it is an act of congress to get the light to turn on or off on both remotes... What is the problem? How do I fix this without going crazy and getting rid of them both wasting my money and having to get a new one
|
||||
Check out some similar questions!
I have 3 harbor breeze fans with three wireless controllers all set to the same remote channel so they 'should' all do the same thing. At times they get out of sync and I have found no way to 'reset' the fans do a default mode. The only solution I have found is to disconnect the AC from two of...
Harbor breeze wireless remote fan with light. Single wall switch. I can only get the light to work by flipping the wall switch and using the remote on button for the light. Is this normal? I would like to operate the fan light by using the wall switch only. Is this do-able?
We bought a home that has a large bonus room over the garage. Installed are 2 Harbor Breeze remote controlled ceiling fans. I did not get a manual for the fans. They are on the same channel. Fan speed on both is the same. The lights are on at the same time. I would like to change channels on 1 fan...
How do I contact harbor breeze about a remote controlled fan that only worked for a week. It has no parts to convert it to pull chains.
We recently remodeled our home and had 3 Harbor Breeze ceiling fans installed. Being that we did not install the fans ourselves, we do not have the instruction manual. All of our fans are set to the same transmitter frequencies, so that when you turn one fan or light on, all of them go on. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
