Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to locate a vent for a sewage lift pump?
[ 11 Answers ]
I am finishing my basement and wanting to install a bathroom. I have cut the cement for my lines and lift station. I cut the hole for the lift station below my sewer line which is about 8' above. Now... what do I need to look for as far as venting? I have had one plumber come over to give me a...
Problems with Sewage Lift Pump
[ 2 Answers ]
I have a sewage lift station in my by level home. At the current time the downstairs portion is not completed so the only thing that runs through the lift pump is the washing machine discharge. Approximately 2 weeks ago I was switching a light fixture and shut off a bunch of breakers to do so. ...
How much is a 6 liter lift pump
[ 0 Answers ]
Good biological additive for sewage-ejector lift station?
[ 2 Answers ]
I have a 50-60 gallon (est) vented fiberglas tank in basement with sewage-ejector pump inside. All wastewater from toilets, sinks, showers, washing machines, dishwashers goes through this system. Generally runs well and pretty clean, but I would like to add some biological cleaner (non-toxic) to...
Is Meyers pentair sewage ejector pump model SR1830 a quality pump?
[ 1 Answers ]
Just installed a sewage ejector pump and I'm somewhat concerned about the manufacture. Not seeing very much information about Meyer. I see Zoeller and Little Giant, so I'm wondering if I got a quality systems. Considering all that was required to get the system in I don't want to revisit this for... View more questions Search
|