 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Murray 309029X92 rider mower won't start
I have a Murray309029X2 with a 10hp Briggs and Stratton engine that won't start. This was "freebie" from my father in law after it just shut off on him while mowing one day and was too lazy to try and fix it. I changed the gas, recharged the battery, changed the plug and tried a little ether in the intake. When I try to turn it on the engine spin and spins but won't turn over and start. I can't tell what's going on... any help out there?
|
||||
Check out some similar questions!
Can you tell me where the adjustment is for tightening the blade drive belt on a Murray 42" 17.5 hp rider mower?
I was an idiot and tipped my Murray Rider mower onto its side, flooding the carb and spark plug chamber with oil. After cleaning that all out and getting a new spark plug, I can't get the mower to start at all. Suggestions? Thanks!
:confused: :rolleyes: I have a 1994 murray rider lawn mower that I can not disengage mower blades? Model 3912-030 12 hp/39" deck/ the blades are engaged all the time / i have checked belt looks good / i have done some belt adjusting/ i have changed the mower deck engagement spring /mower starts...
Have a Murray Rider mower new spark plug and battery but I can't get it to do anything... Don't know where to start on it... any suggestions.
Have a 2001 Murray, with a 12hp B&S last year we were mowing and shut it off to get a cold drink when we came back out it would not start, Battery is fully charged yet it does not crank I feel it could be one of three things but could use some advise. The starter safety switch on the seat , the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
