Ask Experts Questions for FREE Help !
Ask
    mrsstacyfisher's Avatar
    mrsstacyfisher Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2012, 07:28 PM
    Hunter Fan Lights or Fan not working.
    I have a Hunter fan that has a remote but can be controlled by pull chains as well. This morning I turned the light on and then it went off. I tried to turn it on again by remote and by wall and nothing. The fan will not work either. There are two other lights in my home that are on the same switch and they are working fine. Any suggestions?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 24, 2012, 07:38 PM
    Before we get started on your issue I have to get a better understanding of how this unit was wire. If you shut of the fan via pull chain can you turn the fan back on with the remote, usually this can't be done.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Fan not working - brand new fan with remote [ 9 Answers ]

We just purchased a Type 2 Highbury Hunter fan from Home Depot. It comes with a remote. We have followed all the wiring directions in the booklet, but fan does not work. Light works but not fan. Our ceiling wiring has an extra wire (red), so we hooked that up to light wires and light started...

Hunter remote controlled fan -- light is working, but fan is not; 5 years old? [ 2 Answers ]

Fan and light in Hunter ceiling fan stopped working [ 7 Answers ]

I have a Hunter ceiling fan with four lights. Then without anything unusual happening the fan and lights simultaneously stopped working. I operate the unit using a wall switch. When I turn the switch to "on" I can hear the unit beep so I know that power is going to it, but when I press the fan or...

Fan switch on hunter ceiling fan model #20537 not working. [ 1 Answers ]

The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1

Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]

I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...

View more questions Search