 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
M1sa8868 ice maker
Water fills the ice maker but does not stop. If I unplug the water valve the water stops. This is a new valve installed. With ice maker full of water. The water freezes, but the unit will not move the ice in the ice maker to the tray below. If I plug ac back to the water valve. Water will continue to flow in the ice maker, then over flow and fill the tray below with water.
|
||||
Check out some similar questions!
I purchased a new motherboard cause it was burned and I got the parts and its working good until the ice making doesn't work it just keep dispensing water and it leaks. What could be the problem?
There has not been any ice made for about a week. Any suggestions on what's the matter? The ice maker had been slowly producing ice even before that. However it has typically made the ice regularly.The model number is TFX20JRS.
Ice maker not making cubes my ge profile ice cube maker has stopped making ice
On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...
The ice maker in my sub zero model 561 has continued to make ice even though the switch has been turned off. Now the ice drawer is jammed and the ice maker is jammed with ice cubes stuck together. How can I open the drawer and what can I do to fix this issue?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
