Ask Experts Questions for FREE Help !
Ask
    Bob47's Avatar
    Bob47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2012, 04:00 PM
    Igniter replacement
    I have a horizontal York Diamond 80. What must be physically removed to replace the igniter ?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Jan 21, 2012, 05:08 PM
    Loosen one screw that holds the igniter in place and slide it out. The igniter sets in front of the main burners. White ceramic base with a 2 inch black charcoal looking tip. The tip is very fragile and never touch it with your bare fingers. The oil from your skin will shorten the life of the igniter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement Igniter [ 1 Answers ]

What is the part number for a replacement igniter for a carrier furnace model RXC054S3HPCO? Thank you

Igniter keeps going out [ 4 Answers ]

I have a 2000 Amana furnace and have had to replace the igniter 4 times in the past 2 1/2years. The last time was 2 days ago and now it is out again, what should I do?

Igniter won't fire blower comes on and then gas but not igniter, status light on [ 0 Answers ]

Igniter has gone out? [ 3 Answers ]

I have a Lennox GCS29 unit that's at least 9 years old. The heat runs off natural gas. I turned it on a couple of weeks ago to make sure it would work since I spent $600 fixing it last winter. It came on and worked fine. Last night, it got a little cold in the house so I thought I would turn it...

Igniter [ 1 Answers ]

Can you get spark with a bad igniter? Have a honda prelude that won't start

View more questions Search