 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I fix my white:rogers furnace?
Hello! My White: Rodgers Furnace (Electric) is only blowing cold air, even when on a hot setting. Serial Number is 8404E07853 and the other number on it is 10MCE10A240A-1A. Any suggestions on how to get the heat working?
|
||||
Check out some similar questions!
I have a carrier furnace with a White Rogers 36e gas valve. When I measure Resistance between terminal #1 and Ground I get 0. When the bimetal at the pilot connects 24VAC to the terminal it pops the fuse on the control board. I think the valve is bad with a short. How should I be testing this. ...
There is no schematic available, tell me how to wire an OE relay-sequencer to this aftermarket part.
How do I set my therostat to stay on the right temperature?
I just had to have my thermostats replaced and my service man told me the White rogers was much better than my Honeywell. He also charged me $100.00 each plus installation. White Rogers #IF 86 344 Honeywell RTH110B Did I received good information?
thermostat setting will move up to 80 or 90 dgrees at random. White rogers f86-344
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
