Ask Experts Questions for FREE Help !
Ask
    mccrorycj's Avatar
    mccrorycj Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2007, 05:54 AM
    Splicing 220 v
    Can 220 v be spliced to make the wire longer in order to relocate the oven outlet?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Feb 14, 2007, 09:11 AM
    Sure, providing the cable wire is of the same size conductor, quantity of conductors, splicing is done is an approved junction box of the correct size to handle the size and amount of wires being spliced, use the correct splicing connectors for the size and material wire being spliced, and the junction box is covered with the proper plate, and the junction box is left accessible.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Splicing pvc pipe [ 7 Answers ]

I need to connect a "T" to an 1.5" underground pvc pipe. To fit properly a 1" space must be cut in the pipe. The "T" is obviously larger than the opening, how can this be done?:mad: :confused:

220 to 110 [ 7 Answers ]

I'm wanting to run a 110 outlet off my 220 serface unit how do I go about doing this?:confused:

Getting 110 from 220 [ 3 Answers ]

I have a 3-wire 220V going to my well house. I am wanting to come off the 220 to a 110 outlet. I realize this is not the safest thing to do but it is only temporary. My question is, I know I use one wire so I cut let's say the white wire and connect it to one side of this GFI outlet, Do I connect...

Splicing ABS into Cast iron? [ 2 Answers ]

I am in the process of remodling my shower stall. I need to change the shower drain from cast iron to ABS. What do I need to do to complete this project. Can I splice the two together? Thanks

Residential Wire splicing [ 5 Answers ]

I am planning to relocate an old receptacle to a new wall location in our house. If I will splice a new wire to the old one and put it in a box, should that box be visible on the wall(with cover plate) or can I just hide the box inside the wall. Thanks.

View more questions Search