 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Do I manually light the pilot
My furnace was running fine as of this morning. I noticed it felt cold. Checked temp and it is 58, set the furnace to come on via thermostate, Nothing happened, Checked the furnace and no pilot. Power to unit working. How do I get it running? 7p on Sunday; have to do it myself. Thanks
|
||||
Check out some similar questions!
Why does my gas wall heater pilot light go out when I turn the valve from 'pilot' to 'on'? The pilot lights and stays lit until I try to turn the valve. It's got a brand new thermocouple.
I have a GMS8 from what the manual says. We already looked for error code but there is none. It turns on per say but it will not ignite. Please help!
I am trying to light the pilot light on my older Maytag dryer. I cannot find any button to push while lighting the light area. All I see are screws, and electrical wire connections. The dryer does not heat and I assume that it is old enough to have a pilot that needs lighting. Thanks
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
