 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace or thermostat?
Thermostat is set on 70 degrees, but the furnace is not kicking on until house reaches 66 degress. Does not matter what temp I set thermostat at, it still doesn't work until it reaches 66 in house.
Used a jumper wire from red to white and furnace kicked on and ran until I undid wire. Bought new thermostat, hooked it all up, set temp at 72. Waited... Furnace kicked on at 66! Anyone know what is wrong? Thanks, Kerry |
||||
Check out some similar questions!
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
How do you hook up a thermostat for a York furnace to the furnace?
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
