 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
?heil furnace 93%
I have a Heil 93% and I couldn't get any thing to kick on. I found by looking on the mother board 3 heart beats which tells me by the guide that it is pressure switch open when should be closed so first I disconnected lo transition switch and jumper-ed it. And hi blower switch and jumper-ed it and the squirel cage (blower motor) kicks on the inducer motor does not kick on( however connecting to line voltage it works) it gives me 2 beats which tells me pressure switch closed when should be open. I have disconnected thermostat connected are,w,g together.any help would be appreciated
|
||||
Check out some similar questions!
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...
I have a heil model # NULE075AG01 I replaced the ignator a few months back because it was bad, but the new problem is after it runs for a while and heats up the house it shuts off like it should and when it's time to come back on you can hear the blower motor running but there's no heat, I can look...
I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be
Fan runs even with the t-stat off
I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
