 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Garage service entrance conductor size?
200' from meter pole to garage, underground. I am installing a 125A panel in the new garage. What size wire stranded or solid, copper/al, should I run? Can I run guadruplex and identify my ground and neutral on each end?
Thanks in advance for your answers! |
||||
Check out some similar questions!
The garage is 186' from the service at the house. I wanted to make sure the voltage drop would not cause a problem.
What is the size wire for service entrance conductor for 200A service..
I am installing a new service on my residence and I am installing a pole mount meter equipment box with CT metering equipment. It will have an ampacity of 400 amps and will feed both my home and garage. The service at the house is 120/240 volts and is a 200 amp panel. The run in question is 200...
I am running service to a small, 1 room office, at a barn in the country. The electric utility pole has a transformer (230 V, 1 phase) and 200 amp meter. On the pole I have a 200 amp circuit breaker. From the circuit breaker on the meter pole, I have 4/0 4/0 2/0 AL cable in 2" PVC conduit...
I am wiring a two-unit apartment that previously had fuse boxes for services. I am installing a two meter box outside to supply separate 200-amp rated main circuit breaker panels, one for each apartment. The calculated load for one apartment is about 102 amps, the other about 132 amps. What minimum...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
