 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do you boot from CD in Marvell BIOS setup?
Hello!
I was going to reinstall windows 7 on my computer but it doesn't boot from the cd automatically. I restart the computer and then start the "BIOS Setup" using Ctrl M (I have Marvell). Here comes the problem: In "Marvell BIOS Setup" I push enter to get into the settings and it says "Configuration Wizard" and I can't continue to settings. I can press esc and come back but when I push enter again the results are the same. I'm pretty sure that you should be able to press enter after the text "Configuration Wizard" comes and that way get into the settings. I can't do that... Please help! Sincerely Arvid |
||||
Check out some similar questions!
Compaq Presario 5333CL (vintage 2002) XP SP3 Tapping F10 has always been the key to get me into BIOS Setup. The post screen agrees it's F10. Tried it today to check boot sequence, and it doesn't work anymore. Don't think the keyboard is bad because holding down the F10 key prevents the...
I installed a 2nd hard drive in cable position 2. Both hard drive jumpers are set to "cable select". If I go into Windows, Disk Management recognizes the 2nd hard drive with all correct information. I can also open the drive and view all the files. But if I go into Setup (BIOS), the drive is...
I format my computer now every time istart my computer it does not boot until window cd rom is inserted please answer how to stop this
How do you disable network service boot option on a PC is there a jumper reset on the motherboard? I have pulled the password jumper and held down the button to reset BIOS and I have popped the battery. I cannot get into setup which is F10 and F12 is network service boot. Any Ideas!!
The Marvell IDE adapter on my mobo (ASUS p5q se/r, c2d E8500, 2x2g 800 RAM) takes over a minute to detect my IDE drive during boot up, and after looking around the net for some answers all I could come up with is "Ensure if the drive is on its own cable, that it is set to master", I checked that,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
