Ask Experts Questions for FREE Help !
Ask
    Swankytails8's Avatar
    Swankytails8 Posts: 4, Reputation: 1
    New Member
     
    #1

    Feb 13, 2007, 07:37 PM
    Heating problems with Lennox Furnace
    We have a Lennox Elite Series gas furnace, MN # G23Q3/4 100-2 Model. w/Central Air. The blower comes on and starts blowing cold air and approx 30 minutes to an hour later will blow out warm air. We thought it was a faulty thermostat (White Rogers brand) so we put a new one on. The furnace is doing the same thing. We have even cranked the temperature up to 80 degrees and it still blows cold and then an hour or so later it kicks out heat. This happens off and on throughout the day. Can you help please? Thank you.

    P.S. Our problems with this 10 yr old furnace started shortly after a power outage, that changed to a brown out for several hours. Could this be part of the problem?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Feb 13, 2007, 10:14 PM
    Power outage is not the problem. It is the surge of power when it comes back on. My best advice is to call for service. I say that because lennox do have problems and it will be over your head to try to fix it. Not being smart here just stating the facts.
    12345iquestion's Avatar
    12345iquestion Posts: 1, Reputation: 1
    New Member
     
    #3

    Dec 10, 2009, 04:52 PM
    Have you figured out the problem yet? I know this is a couple of years later, but I am having the same issue. Cold air is blown, then a little bit of warm air, and then once the house is finally warm, it starts blowing cold air out again and chills the entire place. What is this all about?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Furnace schematics [ 5 Answers ]

Hi, I need the wiring schematic for a Lennox forced air gas furnace Model #CH7D-51M. Thanks.

Fan on lennox furnace won't run [ 4 Answers ]

Hello I have a 20 year old Lennox Conservator 3... gas furnace/AC combination unit. The problem started as: When I set the thermostat to "heat" and fan on "auto", the burner would light and stay on for a few minutes then shut down (as it is supposed to do) because the fan was not coming on....

Lennox G12 furnace [ 3 Answers ]

Hello, My daughter has an old Lennox G12 furnace and the pilot light went out. I know this should be a simple task to relight, but we are not sure where the pilot light is and don't want to just stick a live flame in to "search" for it. Thanks, Chele

Lennox Oil Furnace Problem [ 12 Answers ]

My mom has an oil fired furnace that just stopped working. I replaced the transformer(white rodgers) that has the connections for the Thermostat,flame detector,etc. That didn't fix the problem. I have hit the reset button and that doesn't work either. At one point,I rotated the Fan Limit switch...

Lennox oil furnace [ 3 Answers ]

What is the proper procedure for cleaning a oil furnace, such as cleanouts to heat exchangers and where could I find a exploded view of a lennox oil funace


View more questions Search