Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My induce fan never stops running on my armstrong furnace.
[ 1 Answers ]
When I plug in my furnace the induce fan starts running and will not stop. It runs fine otherwise. I have replaced the limit switch pressure switch and blower board but it is still doing the same thing. Please help. Mary
My trane furnace blower fan stops intermittently
[ 2 Answers ]
I have a 15 year old heat pump and electric furnace I am so proud of it lasting this long with no problems, but the blower motor will stop running about once a month usually when I most need it (meaning maybe it has stopped other times and I have not noticed it.) I can see the unit is still getting...
Carrier heater blower fan keeps running after the gas turns off.
[ 1 Answers ]
Carrier heater blower fan keeps running after the gas turns off.
Blower (furnace) runs fine when switched-ON but stops after A/C turns on
[ 4 Answers ]
I have a Rheem gas furnace and Carrier A/C. The furnace blower (which moves the air through the vent system) runs fine when switched-ON via the thermostat however after the AC turns ON for awhile, then the furnace blower stops (after various period of time). When this happens the blower does not...
PVC Pipe Leakage, furnace Fan Does Not Stop, Blower Fan Works for 5 MIN and stops
[ 1 Answers ]
1) I had water DRAINING from the furnace in the attic... it overflowed... the pan under furnace was beyond full. 2) I noticed leakage from one of the PVC pipes. 3) I simply replace the PVC pipe where water was leaking, but I forgot to put the PVC CEMENT. 4) I went to turn of the AC... View more questions Search
|