Ask Experts Questions for FREE Help !
Ask
    speedy1991's Avatar
    speedy1991 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 9, 2012, 12:02 PM
    Clutch no pressure in 1998 s10
    Have a 1998 s10 replaced the clutch and pressure plate 2 months ago and slave cylinder 6 mo ago now all of a sudden no pressure bled it 3 times still won't engage clutch to get it in gear , could it be the reservoir seal bad no pushing fluid to slave cylinder?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jan 9, 2012, 12:21 PM
    The clutch master cylinder could be bad or you have air in the system, which can stubbornly pool in elboes. First, see if you can get your hands on a power bleeder and bleed the system again. Clutch master cylinders tend to fail if they are overfilled--never fill above the MAX Line. I change the brake fluid in my 1993 Civic's hydraulic clutch every 2 years, to replace the lubricity of the fluid, prevent corrosion, and purge moisture. I've never had to replace any part of the system, yet.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

AC Clutch 1998 F150 4x4 4.6 V8 [ 1 Answers ]

Clutch on ac froze up. Is this a big task to repair myself?

1987 S10 2.8 oil pressure switch location [ 0 Answers ]

I was wondering where the oil pressure switch is located on a 2.8 motor on a s10 blazer.

How to build pressure 2001 honda civic clutch slave and clutch master [ 1 Answers ]

I have replaced clutch slave and replace the clutch master kit... tried bleeding it but there is no pressure, How do I get pressure to build... also clutch pedal is stuck and won't retract.

Hydraulic clutch no pressure [ 3 Answers ]

I have a Opel corsa utility four months old.Today the clutch suddenly lost pressure and I noticed a liquid leaking onto the floor,any idea what causes this it is still under guarantee and is at gm motors.

Clutch peddle pressure [ 1 Answers ]

Hi, Tx, I appreciate all your help you've been giving to all of us! Clutch peddle pressure: 1990 Honda civic DX 5 mt. 267,000 miles. The clutch peddle pivot pin bent seemingly because of high pressure exerted on clutch peddle. I replaced the pivot pin bracket (which includes the pin). ...

View more questions Search