Ask Experts Questions for FREE Help !
Ask
    linda1602's Avatar
    linda1602 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2012, 04:36 PM
    Blower comes on but burners-electric pilot-don`t light
    Night and Day model 80U-19A 80,000 BTU
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jan 2, 2012, 05:11 PM
    Check all high limits, and all flame rollout switches. If one or more of them is open, the blower will run continuous and nothing else will happen.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot lit but burners will not light [ 1 Answers ]

Pilot is lit but burners will not light

Pilot light burns burners won't [ 3 Answers ]

The standing pilot light is on but the burners won't ignite. The fan runs. Could a bad thermocouple cause this. I know that there are many other problems possible but this is the cheapest place to start.

Pilot is lit but burners will not light [ 7 Answers ]

I have a Fraser-Johnston closet mounted Natural gas using Central heating unit. The unit has been off all summer and I just changed the filters and relit pilot. When I set the thermostat I hear it click at the right temputure for it to turnon but the burners don't even try to light.. Could it be...

Intermittent pilot light burns well but main burners do not light [ 1 Answers ]

I have an Olson furnace with intermittent pilot light with electronic spark ignition. There is a Honeywell S8610U furnace controller. When thermostat calls for heat the ignitor sparks and the pilot flame lights. The flame continues to burn while the ignitor continues to spark for about 5+...

Pilot light lit, but burners won't ignite? [ 4 Answers ]

I've got an older Williams model Propane furnace (model # 450sfa-2) controlled by a Lux 1500 Thermostat, and I've tried everything I can think of. The Pilot lights and stays lit, but the burners will not ignite. Any help will be appreciated, it's been cold the last few days (<45 degrees......

View more questions Search