Ask Experts Questions for FREE Help !
Ask
    fm2657's Avatar
    fm2657 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 1, 2012, 07:37 PM
    What time of outdoor wire do I need to run a subpanel that is 50 meter away
    Hello, I'm adding a outdoor subpanel to my new Metal building that is about 50yrds from the main breaker. My main breaker is a 200 amp main lug. What time of wire do I need to make this work? Plan to have 120/240 machine inside this metal building. Thank you.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Jan 2, 2012, 05:17 AM
    You can use steel, aluminum, or PVC conduit with insulated wire rate for wet locations, or you can use cable rated for direct burial.

    Where are you located?

    Some choices will depend on the amp rating of the new feeder.
    fm2657's Avatar
    fm2657 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 2, 2012, 11:23 PM
    Thank you for the prompt response. Im located in Texas. I have another question... I want to run the wire over the a post or the building. What grade of wire should I use? Wire burial is out of the picture. Thank you.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #4

    Jan 3, 2012, 03:25 AM
    Aerial rated cable, often called Triplex, you may need 4 conductors, called Quadriplex.

    Next need to determine the size conductors.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size meter/tap size do I need to run public water 0.3 miles from meter to house [ 3 Answers ]

I need to connect to public water for a variety of reasons. City Engineering has told me I need to make the determination of tap size. House is ~ 0.3 miles from where meter will be installed on driveway/public street junction. City Engineering will make no recommendations on tap size but have...

Can I run a 50 amp subpanel if a 100 amp main if so what size wire [ 1 Answers ]

Can I run a 50 amp subpanel from a 100 amp main and if so what size wire

Type of wire to use for a subpanel run to my basement [ 16 Answers ]

Hi - I am running a 100 amp service/sub panel down to my basement and was planning on using #2 gauge wire for the run based on electrical guidelines. The line will run for about 30 feet on the outside of my garage in conduit and then feed into my basement for about a 40 foot run in the rafters to...

Gauge of Wire From Meter to house,100 amp fuses,200 feet run. [ 2 Answers ]

Hello, I am intending to replace some wire that runs for 200 feet, from my meter to my house.I live on an island, so the run is quite long ! At either end are breaker boxes with 100 amp fuses in each.Never had any trouble/ fuse blows etc. The old wire (each of the 3 strands) are a little...


View more questions Search