York Diamond 80 furnace shuts down periodically

rossvr Posts: 1, Reputation: 1

New Member

Jan 1, 2012, 08:20 AM

York Diamond 80 furnace shuts down periodically

Model number P2MPD14N08001F shuts down and will restart when I power down and power up. I get a single flash on the trouble shooting indicator. A single flash just says "shut down and inspect." Not much help.

Check out some similar questions!

Troubleshooting york diamond 80 furnace? [ 2 Answers ]

My unit is a York-Diamond 80:The power comes on the amber light gets hot but the unit won't fire-up. What do you think is problem?

York Diamond 90 furnace will not start [ 0 Answers ]

I have a York Diamond 90 updraft furnace in the basement and it stopped working this morning. I tried to troubleshoot the problem: 1. The DRAFT INDUCER MOTOR starts running but the furnace will not come on. 2. I see 3 flashes of the led on the control board which means that the pressure switch...

Aire-Flo gas furnace periodically shuts down. [ 2 Answers ]

I have an Aire-Flo gas furnace - model no. AF80MPA075B3A I rent - however I believe it was installed around 2003. For the last month - the furnace will start, the gas tries to ignite but after 2 seconds it will shut off. It tries to ignit 3 times - then if unseccessful the furnace shuts off. It...

York diamond 80 furnace parts [ 0 Answers ]

Furnace diagnostic light indicates rollout open. Service tech came out and found that rollouts were not tripped. He seems baffled by the problem. The problem is inconsistent. The thermostat calls for heat. The furnace kicks the blower on without igniting burners. Cold air blows through vents. I...

YORK Diamond 90 Furnace code 7 [ 2 Answers ]

YORK Furnace Diamond 90 Model P3URB10N05501D Shows a code 7 What do I do now?

View more questions Search

Check out some similar questions!

Add your answer here.