Ask Experts Questions for FREE Help !
Ask
    Rdroberts's Avatar
    Rdroberts Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 28, 2011, 07:59 AM
    Both furnaces out
    I have two gas furnaces, a main one, and one that heats and cools an addition to the house. Came back from a three day trip and neith was working. HVAC guy comes out. Restarts the main one. It's fine. He guesses that the filter hadn't been changed and that it shut down. Relights pilot on 2nd one. Guesses that wind blew it out though this has never happened in the 9 years we've lived in the house. Figures it
    Is a coincidence that both shut down. Both work fine for two
    Days. Now both out again. Any ideas what might be going on?

Check out some similar questions!

Red t furnaces? [ 2 Answers ]

I am coming up to my first winter in this unit which has a Red T furnace made for mobile homes. The model # is DGAA0077BDTA and the Serial # is 010113672. I have tried to get it running ready but it just won't even ignite. A repair guy who took forever to come and look at it after promising to...

Heil furnaces [ 1 Answers ]

I have a Heil furnace Model EP030F1981 and when I tried to turn on my furnace pre fan comes on but nothing else happened after that. The furnace does not ignite. The blower works when tested manually. This furnace is about 9 years old with no previous problems. Would appreciate any help or...

Are 90% furnaces in 1992 as Efficience as furnaces now? [ 0 Answers ]

I have a armstrong ultra furnce 90% installed in 1992 are the new furnaces with same rating anymore Efficience now?

Furnaces [ 0 Answers ]

I am trying to install a white rodgers 90-113 fan control center on a Lennox GS18 furnace to add a/c. Im just a little confused on the wiring do I need 2 relays or can I just use the one it came with to control the low and high speeds on the blower?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.