 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace won't heat and led lights are saying no prob
Our furnace stopped blowing hot air we called a tec and he replaced the pressure switch and it worked intermitly. He said the board was bad also and wanted anouther 435 to replace it also we just didn't have the cash to do it so it went all the way out last week. I ordered a new one on eBay for $100 and put it in myself. But same prob. Small fan runs not the big one and no flame. Please help it cold here in Idaho Also the led light stays on saying that it isn't detecting a problem and the ac works fine
|
||||
Check out some similar questions!
TNH_BNA5809 I have a Goodman Furnace (Model # PGB 024075-1. The other day I called for heat, the system is not fire up, then I came out to the unit outside to unplug the connection between the Smart valve and the ignitor. It is fire up and run for awhile, and shut itself off. Please help. ...
My not-very-new Trane gas furnace has been struggling intermittently for many months. It's only gotten really bad about 3 or 4 times. Here's what it does: - Quiet clicks I can hear when standing next to it, about 2 per second - Loud clunking noises about once every 5 or 6 seconds, I can...
I recently added a heat pump to my oil furnace and though the installers did a good job they disconnected some of the efficiency modules controlling the oil furnace. I've had them back to "repair" but they say nothing is wrong, but they're just looking at the heat pump. I have a Keeprite oil...
I have an 9 year old carrier weathermaker 9200 gas furnace. I'm getting no heat from the downstairs unit. The upstairs unit is working fine. I took the cover off, and I can see the black electric motor(?) spinning, yet nothing is blowing out through the vents. When I look at the bottom right front...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
