Ask Experts Questions for FREE Help !
Ask
    Rev.griffin's Avatar
    Rev.griffin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2011, 04:59 PM
    Fan works in ON position but doesn't work in AUTO
    I have a gas heater and a Hunter thermostat (Model #44300).
    With thermostat set to HEAT, fan on AUTO, the heater turns on at programmed low temperature and off at programmed high as expected. Fan doesn't come on at all.
    With thermostat set to HEAT, fan on ON, the heater turns on at programmed low temperature and off at programmed high as expected. Fan stays on, as expected.

    And is there a way to change Fahrenheit to celsius or reverse? I can remove the thermostat and find a manual switch on the back, but I did not change it originally unless it was some random mis-key. While attempting to alter the weekday programming, the display changed. The Owners Manual does not include this information in the instructions.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 27, 2011, 05:52 PM
    Sorry, you are lucky your hunter ever worked at all or has lasted as long as it did
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 394dac Blower/ Fan to ON doesn't work, Auto works fine, Missing Relay? [ 0 Answers ]

Hooked up an older (but hardly used) Bryant 394dac. Used a new Honeywell programmable thermostat but fan doesn't run when switched to ON. Is the color coding different or do I need a jumper? Shouldn't the fan switch ON without AC or a cooling fan relay? Was this an option in all models or if the...

Bryant 394dac Fan switch to On doesn't work, Auto works fine [ 0 Answers ]

Hooked up an older but hardly used Bryant 394dac 00080. Used a new Honeywell programmable thermostat but fan doesn't run when switched to ON. Is the color coding different or do I need a jumper? Should the fan switch to ON without AC or a cooling fan relay? Was this an option in all models? Thanks

Ceiling fan works in the clockwise position but not in the counterclockwise position [ 1 Answers ]

Our ceiling fan (circa 1998, Gulf STream Model 978A/five blade) has the typical switch on the side of the housing to enable the fan to go clockwise or counterclockwise. Counterclockwise works at all three speeds. Clockwise does not work at all. Gives no indication (motor noise) that there is any...

FAN doesn't work when it's 'Auto', but works fine at 'On' in my central air/furnace [ 1 Answers ]

undefinedFAN 'On' or 'Auto'FAN 'On' or 'Auto' Hi, I have programmable thermostat connecting air condition / furnace system. Now if I turn system to 'Cool' and Fan at 'Auto', no cool air come out (compressor works, you can hear the noise). If I set FAN to 'On', life is getting better. But the FAN...

View more questions Search