Ask Experts Questions for FREE Help !
Ask
    dwedlake's Avatar
    dwedlake Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2011, 01:06 PM
    How to wire a 2, 3 wire and 1, 2 wire box with a switch and outlet?
    How do I wire a gang box with a switch? I have two 3-wire 14-3 wires feeding the box and a 2-wire 12-2 going to and outlet I want on the switch?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 27, 2011, 04:19 AM
    We need to know the exact purpose of these cables entering the box. Without knowing how these cables are wired at the other ends, there is no way for anyone here to know how to connect at this switch box.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I connect a 240 VAC 4-wire generator cable to a 3-wire dryer outlet? [ 1 Answers ]

I have a 5000 watt generator that I want to hook up to power my well and some lights and refrigerator for the next couple of days until power is restored. The generator has a 240 volt outlet which I have a plug and cable for. The cable ends in 4 wires: black, red, green white. The dryer outlet and...

Al wire on old trailer home, 120v on breaker but 50v on hot wire to outlet. [ 2 Answers ]

Al wire on old trailer home, 120v on breaker but 50v on hot wire to outlet.

How do I wire a GF outlet and a switch in double box with a 12/2 feed only? [ 7 Answers ]

This is a new construction but sheetrock is up... I need to make one ground fault outlet and one switch to a vainity light in one double box... the only wire that was put in is a 12/2 wire. One Black, one white, one ground. I would like the outlet to be always hot if possible, but if not I guess...

How do I wire a quick fuseable disconnect box using 10/3 wire. [ 2 Answers ]

I cannot seem to get the "load" and "line" wires correct. I have a white, black, and ground coming from panel. I also have black, white and ground going to receptable. I do not seem to have the wires correct.

Attaching Copper wire to alum. Wire in fuse box. [ 1 Answers ]

I have a electric stove to hook up in my house that had a gas stove. The electric 50 amp receptacle is already in place from the previous owner. The existing stove “aluminum” wiring goes into the circuit breaker box, but the wiring is cut off inside the circuit breaker box and is too short to...

View more questions Search