Ask Experts Questions for FREE Help !
Ask
    cherylheb's Avatar
    cherylheb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2011, 11:23 AM
    240 volt heater into a 50a 250v receptical
    How do I plug a 20 amp 240 volt heater into my 50 amp 250 volt wall receptical?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Dec 24, 2011, 08:58 AM
    Good morning and welcome.

    We need additional information, please.

    Can you describe the cord and cap plug from the heater?

    Or, Can you please attach pictures, using the "Go Advanced" tab.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

240 Volt 3 Wire Service to 4-Wire Receptical [ 4 Answers ]

I am replacing an electrical stove with a new electrical range. The old stove was hard wired with a 3-wire service. I assume 2 hot and a ground). The new range requires a 4-wire receptical (I assume 2 hot, neutral & ground). Can I wire the 3-wire service to the 4-wire receptical? (How do I do...

Extension Cord from 3 prong 50a 250v plug (male) to 3 prong 250v 20a (female)? [ 4 Answers ]

I want to connect my ac unit 208v need 20a fuses, to my stove plug which have a 50a 250v type outlets. I have this http://images.marketworks.com/hi/58/57750/pas5864-bku-ea-2.jpg And want to fit into this http://applianceguru.com/dryers/dryer_outlet.jpg

240 volt heater [ 1 Answers ]

240 volt heater, can I control this with a 120 volt line T-stat?

240 volt wall heater [ 3 Answers ]

I am installing a wall heater in a room. The heater has a ground wire and a black and red wire. How do you hook it up to 240 volts? Do I need to run four wires, three wires? I have a double breaker at 20 amps already in the circuit breaker panel but what do I need to hook up power. Does one of...

View more questions Search