Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
On a 1990's vintage Lennox gas heater, how do I clean the flame sensor? The furnace
[ 0 Answers ]
Operates intermittently, it starts up, heats for several minutes, then shuts off. Doesn't seem to be reaching full temperature either.
Motion Sensor Question
[ 2 Answers ]
I have a 100+ year old house with updated electrical on the lower level. I also have a motion sensor alarm that I arm every night as I go to bed. My lights down stairs have been turning on during the night. I have no explanation for it. I would like to reject the notion of a ghost as I've lived...
Lennox heat pump, once on the heat won't turn off
[ 0 Answers ]
My problem began when the outside unit froze up, the heating company replaced the defrost board, checked all the circuits, and replaced the thermastat and the unit still Runs and runs and doesn't shut off, raising the temperature to over 80 degrees when The thermastat is set at 65. HELP!
20 yr old Lennox heat pump fan blows constantly in heat mode
[ 5 Answers ]
20 year old Lennox heat pump - outside temps been 30's at night, 40's daytime UPDATE: I went outside and the unit is covered in frost on 3 sides! I've been reading on Google about frosted heat pump units and can't determine how to manually defrost it. Apparently, the auto defrost is not...
Lennox Heat Pump
[ 1 Answers ]
I have a Lennox heat pump. I have measured 220VAC to the bottom of the compressor contactor. However, when I turn the thermostat to cool the blower fan comes on but the outside compressor is not energized. I can manually engage the contactor and the compressor and cooling fan come on. I can't... View more questions Search
|