 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What settings should I have my water conditioner on?
There is a dial with numbers 1-12, then a dial for the time of day, then another dial that gives you the option of either- in service, start b.w. rinse, backwash, pause, rapid rinse, and settle rinse. It seems to be running all the time. We have 5 people living here and high iron in our water so we do need it working but it's using so much electricity running all the time. We have well water.
|
||||
Check out some similar questions!
Air conditioner is turned on, but it will not cool. Water leaks
We could be away from home for as long as 3.5 - 4 months this winter. We plan to turn the water off at the meter and to drain the inside lines at the lowest point in the house. If I leave the water heater on at the lowest setting, will the water evaporate enough to expose the electring heating...
HI, My Kenmore is 5 yrs old model # 110.25862400 I started a load of laundry today. I pushed the timer to start a load. The water filled up and that was it. I tried different settings and cycles on the timer still nothing. No sound, no movement, just dead. There was no previous indication...
In LAN settings, when I click on TCP/IP settings, it is not allowing me to open up.
I have a State select 50 gallon water heater. I have it set approx 3/4 way to the hottest setting. The hot water does not seem to last that long or get that hot. Where should the setting be for this type of hot water heater? Typical 3/2 home with 4 occupants. Water does have to travel...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
