Ask Experts Questions for FREE Help !
Ask
    kevingar's Avatar
    kevingar Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2011, 03:16 AM
    My furnice is giving me a
    The blower is working but the burners aren't lighting
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 18, 2011, 04:15 AM
    Hi kevin, post more info (brand and model number) and you'll get better answers. In the mean time, check the safety switches. Does the furnace have a standing pilot?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnice [ 0 Answers ]

4) Blowr motor started and blew for 1 or 2 secs; clicks and blow motor stopped

Furnice is over heating [ 1 Answers ]

I have a old Duo Therm furnice. I have had to replace the thermial fan switch, and the man. Limit switch. Now it is warming up and the man. Limit switch shuts it all down before it reaches the temp. and then that has to be reset. My fan is blowing every few min and only for 30 sec. even if the...

Closet where furnice is installed [ 4 Answers ]

We live in South Texas and it gets extremely hot in the summer. We sealed up the ceiling in the closet where our furnace is because the heat from the attic was so extreme you could feel the heat when you walked past the closet. The return air is right below the closet door where the furnace is...

Replacing furnice filters [ 2 Answers ]

I have a Carrier model #58dr075-ba. I can not locate where the filters are to change them. Thanks

View more questions Search