Ask Experts Questions for FREE Help !
Ask
    bdito's Avatar
    bdito Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2011, 05:16 PM
    Tanning bed wiring
    Tanning bed use to run with timer have to close loop cable has red white black and green wires in a pin and lock connection
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 16, 2011, 06:02 PM
    You need a 4 prong 240VAC outlet wired with the same AWG as the plug. Red and black are hot, white is neutral and green is ground.
    bdito's Avatar
    bdito Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 16, 2011, 08:33 PM
    Tanning bed
    The four pole plug is in the tanning bed red and black are together the whit and green are separate and when I put bed on it throws the breaker with those four wires can I make a closed loop so breaker won't throw
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 17, 2011, 04:08 AM
    Why do you have the black and red together on 4 pole plug?

    Of course it will trip the breaker.

    What plug do you have?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tanning Bed Wiring [ 1 Answers ]

How do I wire a tanning bed with Voltage of 220 amprerage 12, and Circuit breaker (AMPS) 20 Outlet shows a 6-20R which is what I have. Can I use 12/2 wire? The wire has a black, white and copper wire where do these wires go on the outlet?

Tanning bed wiring [ 1 Answers ]

I have a tanning bed that has a 3 prong male plug - I need to wire an outlet with 20amp service - will I only need to run a 12/2 wire - using the white and black as hot??

Wiring for a tanning bed [ 5 Answers ]

I have a Home tanning bed that I will need to install a breaker, wiring and receptacle. The bed is 20 amp 250 volt. Will 12/2 wiring be all right? Also do I need a double pole breaker for the fuse box, and if so how many amps?

Wiring a tanning bed. [ 3 Answers ]

We are trying to hook a 220 volt, 100 watt tanning bed. We have a 20 amp breaker and the wire recommeded at home depot was a 12/2 with a ground. Will this wire work or do we need a different size?

Tanning bed [ 12 Answers ]

Is it really bad? I have been getting tanned for years... I am worried now.

View more questions Search