Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you install an iron lintel in a cinder block wall after cutting the wall open?
[ 0 Answers ]
I plan on cutting & opening 7' tall x 8' wide in an existing cinder block wall 8"x8"x16" that was laid with a stack bond (joint on joint). How do I insert an iron lintel 1/2" thick x 4" wide x 8'6" length? The length of the lintel is planned to go beyond the width 3" on each side. Is that enough...
Knocking down cinder block wall
[ 5 Answers ]
My basement has cinderblock walls that separate the basement from the garage. I don't park in the garage and I wanted to knock down the wall to expand the basement. I wanted to save some of the garage for storage so I wanted to use the same cinder blocks to build the wall back up. Is this even...
Cinder block wall separating
[ 2 Answers ]
Howdy We have an old workshop built completely from cinder blocks. The concrete foundation has shifted and so the back wall, which is 5o feet long, has started to separate from itself. There is a 'crack' starting from the top of one corner and continuing about half the wall traveling down to he...
Pouring a concrete wall in front of a damaged cinder block wall
[ 1 Answers ]
I need to repair a well house that has buckling cinder block walls. The well is below ground with a shed above it. The room is approximately 9' x 8' and 8' tall with cinder block walls and a concrete floor. The block did not have concrete poured in it when it was built, the blocks are beginning...
Cinder block wall needs repair.
[ 4 Answers ]
We have a cinder block wall in front of our property. Several cinder blocks have come loose and have fallen off. This makes our property look trashy. I would love some suggestions on not only how to repair this, but also on how to make this wall look better. Thanks you much, Bea Wilhelm View more questions Search
|